ProForm Performance 750 Treadmill Uk Manual - Page 12

11. Raise the Frame (55) to the position shown. Have a second person hold the Frame during 11 the next two assembly steps. Attach the Latch Crossbar (70) to the Frame (55) with two 1/4" x 1 3/4" Screws (100). 55 100 70 12. Orient the Storage Latch (56) so that the large barrel and the latch knob are in the positions shown. Attach the lower end of the Storage Latch (56) to the Base (86) with an M8 x 50mm Bolt (6) and an M8 Nut (99). Attach the upper end of the Storage Latch (56) to the Latch Crossbar (70) with an M8 x 45mm Bolt (5) and an M8 Nut (99). Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 12 55 99 70 5 Latch Knob Large Barrel 56 99 86 6 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24). 12