ProForm Racer 5.0 Instruction Manual - Page 7

Maintenance And Troubleshooting

Get ProForm Racer 5.0 PDF manuals and user guides View all ProForm Racer 5.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

STEP 4 Attach the saddle (34) to the horizontal saddle post (33), secured the screw and nut under the Saddle. And then fit the horizontal saddle post (33) to the vertical saddle post (29), secured it with the flat washer (32) and knob nut (31) as shown. Insert the saddle post (29) into the main frame (1), secured with the Pop -pin knob (30) at a proper height as shown. STEP 5 Put the pulse sensor wire (4) through the hole of vertical tube (12). Use the T shaped bolt (25) to secure the handle cover (10) and the handlebar (7) to the vertical tube (12) with spacer (9) and flat washer (8). Connect the Upper sensor wire (3) and pulse sensor wire (4) to the computer (17), and then fix the computer (17) to the vertical tube (12) with cross pan screw (2) and flat washer(15). Now, your machine is ready for use. MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately. To clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
7
STEP 4
Attach the saddle (34) to the horizontal saddle post (33),
secured the screw and nut under the Saddle.
And then fit the horizontal saddle post (33) to the vertical
saddle post (29), secured it with the flat washer (32) and
knob nut (31) as shown.
Insert the saddle post (29) into the main frame (1), secured
with the Pop –pin knob (30) at a proper height as shown.
STEP 5
Put the pulse sensor wire (4) through the hole of vertical
tube (12).
Use the T shaped bolt (25) to secure the handle cover (10)
and the handlebar (7) to the vertical tube (12) with spacer
(9) and flat washer (8).
Connect the Upper sensor wire (3) and pulse sensor wire
(4) to the computer (17), and then fix the computer (17)
to the vertical tube (12) with cross pan screw (2) and flat
washer(15).
Now, your machine is ready for use.
Inspect and tighten all parts of the exercise bike
regularly.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap.
IMPORTANT: To avoid damage to the console,
keep liquids away from the console and keep the
console out of direct sunlight.
MAINTENANCE AND TROUBLESHOOTING