ProForm Sport 1100 Treadmill Canadian English Manual - Page 8
Start all four Silver Pulse
View all ProForm Sport 1100 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (not 5 shown) to a vertical position. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Then, insert the pin into the Latch Housing (71), and tighten the knob onto the pin. See steps 2 and 4. Fully tighten the two Endcap Screws (79). 71 Knob 70 Spring Collar Pin 6. Slide a Handrail (62) onto the post on the Left Upright (70). Finger tighten two 1 1/4" Bolts (63) into the Handrail and the post; do not fully tighten the Bolts yet. Attach the other Handrail (62) to the Right Upright (76) in the same way. 6 62 63 Post 70 63 62 76 7. Make sure that the Upright Wire (75) is positioned at the side of the post on the Right Upright (76) as shown. Set the Pulse Bar (66) on the Left and Right Uprights (70, 76). Attach the Pulse Bar with four Silver Pulse Bar Screws (64) and four Pulse Bar Star Washers (65). Start all four Silver Pulse Bar Screws before firmly tightening them. Firmly tighten the four 1 1/4" Bolts (63). 7 64 65 63 66 70 8 64 65 63 75 76