ProForm Trainer 10.0 Treadmill English Manual - Page 10
Attach the Left Upright not shown in
View all ProForm Trainer 10.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. Press the other Grommet (77) into the square hole (E) in the top of Right Inner Upright (126). 4 Then, remove the wire tie (A) from the Upright Wire (81). With the help of a second person, raise the Right Upright (90) and the Left Upright (not shown). 81 A 77 E 90 126 5. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). 5 Next, hold a Wheel (97) inside the Base (94), and insert a 3/8" x 1 3/4" Screw (62) through the Base and the Wheel as shown; do not fully tighten the Screw yet. 7 Next, insert two 3/8" x 2 3/8" Screws (7) with two 3/8" Star Washers (13) and a 3/8" x 1 1/4" Screw (63) with a 3/8" Star Washer (13) into the 13 bracket at the bottom of the Right Upright (90), and partially tighten the three Screws into the Base (94); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 94 13 63 90 81 62 97 10