ProForm Trainer 10.0 Treadmill English Manual - Page 12

not overtighten the #10 x 3/4 Screws 9.

Get ProForm Trainer 10.0 Treadmill PDF manuals and user guides View all ProForm Trainer 10.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

8. Attach a Handrail (86) to the Right Inner Upright (126) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11) in the location shown; do not fully tighten the Screws yet. Make sure not to pinch the Upright Wire (81). Attach the other Handrail (86) to the Left Inner Upright (125) in the same way. Note: There are no wires on the left side. Then, remove and discard the indicated screws (F). 8 11 F 28 86 28 125 11 F 86 126 81 9. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Handrails (86) with four #10 x 3/4" Screws (9) and four #10 Star Washers (5); start all four Screws, and then tighten them. 9 9 28 5 86 93 Next, firmly tighten the four 5/16" x 2 1/2" Screws (28). 9 86 28 5 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
8
81
126
125
86
F
86
28
11
11
28
8.
Attach a Handrail (86) to the Right Inner Upright
(126) with two 5/16" x 2 1/2" Screws (28) and
two 5/16" Star Washers (11) in the location
shown;
do not fully tighten the Screws yet.
Make sure not to pinch the Upright Wire (81).
Attach the other Handrail (86) to the Left
Inner Upright (125) in the same way.
Note:
There are no wires on the left side.
Then, remove and discard the indicated screws
(F).
F
9
9
28
28
5
5
93
9
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86) with
four #10 x 3/4" Screws (9) and four #10 Star
Washers (5);
start all four Screws, and then
tighten them.
Next, firmly tighten the four 5/16" x 2 1/2"
Screws (28).
86
86