ProForm Xp 70 Bike Exerciser English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench screwdriver . and Phillips Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 22. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call toll-free 1-888-533-1333. M8 Split Washer (50)-7 M8 Nylon Locknut (65)-8 M10 Nylon Locknut (63)-4 M4 x 12mm Screw (60)-2 M4 x 16mm Screw (57)-4 M8 x 37mm Button Bolt (52)-4 M8 x 90mm Button Screw (41)-1 M8 x 25mm Button Screw (51)-2 M10 x 112mm Carriage Bolt (43)-4 1. Attach the Rear Stabilizer (16) to the Frame (1) with two M10 x 112mm Carriage Bolts (43) and two M10 Nylon Locknuts (63). 1 43 16 1 63 5