ProForm Xp 80 Vf Treadmill English Manual - Page 8
lower Base Pad Screw, without the Base Pad, first.
View all ProForm Xp 80 Vf Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. With the help of another person, carefully lower the Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs (63) as you tip the Uprights. Make sure that the Extension Legs remain in the Uprights. Attach each Extension Leg (63) with two Base Pad Screws (39) and a Base Pad (57) as shown. Attach the lower Base Pad Screw, without the Base Pad, first. Attach two Base Pads (57) to the base of the Uprights (69) with two Base Pad Screws (39). Next, attach the two Wheels (66) with two Wheel Bolts (64), four Wheel Spacers (108), and two Wheel Nuts (32) as shown. Do not overtighten the Wheel Nuts; the Wheels should turn freely. With the help of another person, carefully raise the Uprights (69) to the vertical position. 4 69 66 108 108 32 64 57 39 69 57 39 63 66 108 108 64 39 57 32 57 39 63 5. Hold the Console Base (47) near the Left Handrail (71). Attach the two ground wires on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 5 47 Small Hole 71 Ground Wires 75 6. Set the Console Base (47) on the Right Handrail (72) and the Left Handrail (71). Attach the Console Base with four 6 1/2" Screws (48). Start all four Screws before tighten- 72 ing them; do not overtighten the Screws. 47 71 48 48 8