ProForm Xp 80 Vf Treadmill English Manual - Page 9
Screws 48 into the Right Grip Plate and the Console
View all ProForm Xp 80 Vf Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Touch the Right Handrail (72) to discharge any static. Press the end of the Upright Wire (42) into the socket in the bottom of the Console Base (47). The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it. 7 72 42 47 8. Press the Upright Wire (42) into the slot in the underside of the Console Base (47) in the indicated area. Cover the Upright Wire with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten three 1/2" Screws (48) into the Right Grip Plate and the Console Base. Attach the Left Grip Plate (32) over the ground wires and the other wires with three 1/2" Screws (48). Be careful not to pinch any of the wires. If necessary, double up the ground wires before attaching the Left Ground Plate. 8 47 Slot 42 36 32 Ground Wires 48 48 9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill. 9