ProForm Xp Weight Loss 620 Treadmill User Manual - Page 9

7. Press a Front Handrail Endcap (97) into the Left 7 Handrail (33). Attach the Front Handrail Endcap with a #8 x 3/4" Endcap Screw (16). Slide the Left Collar (47) onto the Left Upright (74). Align the large holes in the Left Collar with the large holes in the Left Upright. Set the Left Handrail (33) on the Left Collar. Attach the Left Handrail (33) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Tighten two #8 x 3/4" Screws (12) into the Left Collar (47). 33 47 74 97 16 9 12 7 8. Hold the Right Handrail (34) near the Right Upright (78). Insert the Upright Wire (38) through the Right Collar (60), into the hole in the bottom of the Right Handrail, and out of the large hole in the side of the Right Handrail. See the inset drawing. Insert the included plastic tie through the holes in the Right Handrail (34) as shown. Look inside the Right Handrail. Make sure that the plastic tie holds the Upright Wire (38) to the side as shown in the inset drawing. Tighten the plastic tie. Press a Front Handrail Endcap (97) into the Right Handrail (34). Attach the Front Handrail Endcap with a #8 x 3/4" Endcap Screw (16). Attach the Right Handrail (34) with two 3/8" x 1 1/4" Bolts (7) and two 3/8" Star Washers (9). Firmly tighten the Bolts. Tighten two #8 x 3/4" Screws (12) into the Right Collar (60). 9. Attach the Pulse Bar Bottom (95) to the Left Handrail (33) and the Right Handrail (34) with two #10 x 3/4" Screws (5) and two #10 Star Washers (27). Remove the long tie from the Upright Wire (38). 8 97 Large 16 Hole 38 Plastic Tie 79 34 12 60 Hole 34 Tie 38 78 60 Hole 9 33 27 5 Long Tie 5 38 95 27 34 9