ProForm Ze 6 Elliptical English Manual - Page 10

7. Apply some of the included grease to an Arm Axle (93). Insert the Arm Axle (93) into the Right Pedal Arm (37), through an Arm Spacer (120), and into the Right Roller Arm (39). Then, tighten an M10 x 20mm Screw (107) with an M10 Washer (111) into each end of the Arm Axle (93) at the same time. Repeat this step to attach the Left Pedal Arm (38) to the Left Roller Arm (40). 7 38 107 111 40 8. Identify the Right Upper Body Arm (25) and orient it as shown. Do not insert the Right Upper Body Arm into the Right Upper Body Leg (26) yet. Apply some of the included grease to the axle on the right side of the Upright (4). Slide the Right Upper Body Arm (25) onto the right side of the Upright (4). Attach the Right Upper Body Arm with an M8 x 18mm Screw (109) and an M8 Washer (103). Repeat this step to attach the Left Upper Body Arm (27) to the Upright (4). 8 27 39 120 93 37 Grease 111 107 4 Grease 25 103 109 26 10