ProForm Ze 6 Elliptical English Manual - Page 12

12. While a second person holds the Console (8) near the Upright (4), plug the Upper Wire (116) and the Pulse Wire (117) into the matching receptacles on the back of the Console. The connectors on the Upper Wire (116) and the Pulse Wire (117) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the console may become damaged. Tip: Avoid pinching the wires. Attach the Console (8) to the Upright (4) with four M4 x 16mm Screws (97). 12 8 Avoid pinching the wires 116 4 117 97 13. Apply a small amount of the included PTFE 13 grease to a paper towel. Spread a thin layer of the PTFE grease evenly along the Right and Left Tracks (11, 33) where the Rollers (48) move. Then, wipe off any excess grease. 48 33 PTFE Grease 11 14. Plug the Power Adapter (114) into the receptacle on the frame of the elliptical. 14 114 Note: To plug the Power Adapter (114) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 13. 15. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 12