ProForm Zx2 Bike English Manual - Page 6
the Seat Post into the Frame 1. Slide the Seat
View all ProForm Zx2 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 95mm Patch Screws (76). 2 2 76 3. Loosen the Adjustment Knob (27) in the Frame (1) a few turns. 3 Orient the Seat Post (6) as shown. Then, pull the Adjustment Knob (27) outward and insert the Seat Post into the Frame (1). Slide the Seat Post upward or downward to the desired position, and release the Adjustment Knob. Move the Seat Post (6) upward or downward slightly to make sure that the Adjustment Knob (27) is engaged in one of the adjustment holes in the Seat Post. Then, tighten the Adjustment Knob. 1 Adjustment Holes 6 1 27 4. Orient the Seat (23) and the Seat Carriage (24) as shown. Attach the Seat (23) to the Seat Carriage (24) with four M8 Locknuts (72) and four M8 Split Washers (75). Next, slide the Seat Carriage (24) onto the Seat Post (6). Slide the Seat Carriage all the way forward, and tighten the Seat Adjustment Knob (26). Then, tighten an M4 x 5mm Bright Screw (91) into the rear of the Seat Post (6). 4 23 24 75 72 91 6 26 6