Pyle GDV785BK User Guide - Page 8

Cycle Video Recording Connect the included GPS antenna to the Gear Pro's GPS port located next to the HDMI port, under the protective flap cover. The GPS antenna records your geographic data during the time of recording which can then be used with the included software. Upon connecting the device to your computer, the GPS software provides a 'Google Map' of your destination at the time you were recording video. These videos with GPS data can be found in the 'Cycle Video' Mode. Install the software, connect the antenna then transfer the data to your computer. Motion Video Recording Navigate to 'Motion Detection' settings to activate motion detection recording ability. Motion Detection settings allow you to choose from close (off), 30 seconds, 1 minute, and 3 minutes. Choose your desired time interval and then record a video. When activated, the motion detection recording function allows you to record video for your selected amount of time. The Gear Pro will sense movement and automatically record in 30 seconds, 1 minute or 3 minute videos ͲͲ which will then cycle and continue to record videos until you stop recording or deactivate the Motion Detection feature. Delete Files Press " " to enter playback mode. Choices available "Capture Play/Video Play/GͲsensor Video/Cycle Video". Choose your desired selection from the 'Play Mode' screen and press " files available in that category. " on your desired selection. This opens media Navigate to your desired selection with the / keys. Then press " MODE " on the media file you wish to delete. The camera will prompt you to 'Delete' (deletes the single, highlighted file) or 'Delete All' (deleted all media in the selected mode). Navigate to your selection with / keys, then press " " to confirm deletion, or press the " MENU " key to return. Note: When GͲsensor is turned on in the settings menu ("4G / 8G"), in case the camera senses an impact, it will save crash video footage, it cannot be deleted from the camera directly. Only through formatting card or from the PC can the crash footage be deleted. Setup Mode (Camera Settings) Press " MENU " to enter into setting mode. You can then access: Capture Mode (Image Settings), Video Mode (Video Settings), or Setup Mode (Device Settings). Navigate to your selection with / keys, then press " " to confirm your choice. Capture Mode: SIZE: 16M (4618*3464), 5M (2592*1944) Quality: High/Middle/Low EV: 1/2/0/Ͳ1/Ͳ2 White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent/ Automatic Photos Close (OFF) /3secs/5secs/10secs/30secs/1min Video mode SIZE: 1080P, 720P, VGA (with variable FPS selection) EV: 1/2/0/Ͳ1/Ͳ2 White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent/ MIC Volume: OFF/ Level One/Level Two/Level Three/ Level Four Video Time (Loop Recording): Close/2 mins/5 mins AntiͲShaking: Open/Close TV Playback Turn the camera on, connect the HDMI port of camera to TV via the HDMI cable, choose the HDMI input source mode on your compatible TV. The LCD screen of camera will turn off automatically, all operation and functions can be shown on TV. (FBS
1SP
3ZEFS
7.