Pyle NCBL100RC Instruction Manual - Page 11

How to Maintenance CAUTION: DO NOT immerse the motor base into water or any other liquid, nor can risen it under water. CAUTION: Handle the blades assembly with care, as the blades are very sharp. 1. Separate / remove all parts from each other. 2. Clean the motor base with a damp cloth and wipe dry. 3. Place the cups, lids in the top rack of the dishwasher. Carefully hand wash the lids, cups and blades assembly in warm, soapy water with a soft cloth. 4. Always clean the product before storing. 5. Store the blender upright. Do not place anything on top. Store the cups and the rest of the attachments along side the appliance where they will not be damaged and won't cause a hazard. 6. Store in a dry dark place, keep it out of sunshine. Troubleshooting Please check and analyze the fault before contacting the after-sales service department. PROBLEMS POSSIBLE Double click the power button and no feedback Stop working at midway Leakage at the container Lid/Blade assembly will not properly align to the cup. It appears unusual smell when initial use REASONS AND SOLUTIONS Check the product if it is fully charged. If the indicator shows in red color, it means with no power. Charge the blender Check the machine and parts if all are assembled well. Reassemble the machine and parts followed with instructions on manual Too much food and fruit in the cup which caused overload or block up then ceased.Decrease the food inside and restart. Make sure that your lid or blade assembly is properly assembled to the cup. Leaking may occur if it is misaligned when twisted onto the cup. Turn the lid tightly clockwise. Set the cup on a level surface. Place the lid or blade assembly on top of the cup and align the threads so that the lid/blades sit at on the cup. Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal. It is normal that appears unusual smell in the initial uses. It will not appear this kind of situation after several uses. It will appear unusual smell if use the product for too long time, then you must turn o the button, let it cool sown for 30mins. www.NutriChefKitchen.com 11