Pyle NCBL100RC Instruction Manual - Page 8

How to Use the Blender ASSEMBLY AND OPERATION Note: Please read the 1-5 page safeguard again before you use it. 1. Take out the blender and remove all packaging material and labels from the appliance. 2. Wash the lid, cups and blades assembly in warm, soapy water with a soft cloth. CAUTION: Handle the blades assembly with care when washing, as the blades are very shape. 3. Rinse and dry thoroughly. 4. Cups and lid are dishwasher safe. 5. Wipe the motor base clean with a damp cloth. 6. Place the motor base on a clean, dry, level surface such as a counter or table top. 7. Ensure the blender is fulled charged. Take cup and ll with ingredients up to the max ll line. 8. Place the blades assembly onto the cup and twist it on tightly until you have a good seal (Fig.1). 9. Turn the cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn it clockwise, now, it is ready to use (Fig.2 & Fig.3). 10. Double click the power button, it starts to work. (Fig.4) After 1 mins blending, it will stop working automatically. When you have reached your desired consistency, stop the appliance byclicking the power button. Wait for the motor to stop running. Then turn the cup counterclockwise and pull straight up to remove. (Fig.5) 11. Turn the cup upright and remove the blades assembly by twisting the blades assembly counterclockwise. (Fig.6) Be sure to store the blades assembly attached to an empty cup when not in use. 12. Place the Sip & Seal lid onto the cup, twist to seal and enjoy! 8 www.NutriChefKitchen.com