Pyle PA305 Instruction Manual - Page 14
About the feedback filter, Caring for your PA305, Amplifier, Replacing a fuse
View all Pyle PA305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
About the feedback filter The PA305 features an anti-feedback filter, which can help to reduce or eliminate squealing or other noise caused by acoustic feedback. To engage this feature, after you turn on the amplifier, turn the front panel-mounted FEEDBACK control counterclockwise. This control decreases the feedback frequencies by up to 12DB. Caring for your PA305 Amplifier Your PYRAMID Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use. Keep the amplifier dry. If it gets wet, wipe immediately. Use the amplifier only in well-ventilated installation. Handle the amplifier gently and carefully- do not drop! Keep the amplifier away from dust and dirt. Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents or detergents! Replacing a fuse This amplifier uses a 250V, 3A fuse for protection from power surges and short circuits. If the amplifier suddenly shuts down and will not turn on, it is likely that this fuse has blown. To replace the fuse: 1.Locate the fuse holder on the rear of the cabinet and unscrew the fuse compartment cap. 2.Remove the old fuse and replace it with an identical, serviceable fuse. CAUTION: Never use a fuse with a higher rating! 3. Replace the fuse compartment cap. 13