Pyle PAH1 PAH1 Manual 1 - Page 6
Barometer, Altimeter
View all Pyle PAH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
THE BAROMETER THE ALTIMETER Maximum and Minimum • Press Button Ato enter the Altimeter mode. 1. Press Button 0 to enter the Memory mode. 2. The memory of maximum and minimum barometer will be scrolled on the display automatically. _EIOIII'IIAX r11D '~.6: 01 L Setting the Altitude 1. To keep a cheel< and re-adjust the altimeter, it will lead to the most EIII 3. To reset the memory, press and accurate reading. hold Button B. At the same time, the memory for the hygrometer and the thermometer will be reset also. 4. Press Button 0 to quit or left It return tmI EIOIII' liN f01 90BD: 01 2. Press Button Ato normal mode and then hold Button Aagain, the altimeter digits will start to flicker automatically to Normal Mode after 3. Press Button Bto set and then 30 seconds. press Button A to confirm. 4. Repeat Step 3 to set your desire 01 digits The Atmospheric Pressure Bar Chart 1. Press Button 0 to enter the Bar Chart Mode 2. The atmospheric pressure chart records the atmospheric changes for the past 12 hours and it will be scrolled on the display automatically. • The history hours are: o H = Current • 1 H = Past I hour - 2 H = Past 2 hours - 3 H = Past 3 hours - 6 H = Past 6 hours - 12 H = Past 12 hours 3.To reset the records, press and hold Button B. 4.Press Button 0 to quit or left it retum automatically to Normal Mode after 30 seconds. -OlD ,~: l 01 Zeroing the Altitude (Sea -l e v e l ) 1. To re-setting the height at sea-level, press Button Ato Normal Mode. 2. Hold Button A again until all digits are reset to zero.