Pyle PBC5200PN Instruction Manual - Page 15

6.6 To set the parameters of wired broadband Internet access In wired Wi-Fi mode, 3G Wi-Fi is equivalent to a wireless router, the Ethernet port works as WAN port, all of the wireless terminals only connect to the Internet via Wi-Fi router. Click the "Network Settings" → "WAN", choose the way to access the Internet according to the front-end broadband lines, and the router supports three kinds of common wired Internet: static IP, dynamic IP, PPPoE. a) Static IP If the network provider provides the way of static IP for your access to Internet, you need to enter the IP address, subnet mask, gateway, DNS server, alternate DNS server provided by your ISP or network administrator. Static mode IP address Subnet Mask Gateway Primary DNS server Alternate DNS server OK Cancel b) Dynamic IP If the network provider provides the way of dynamic IP for your access to Internet, you do not need to make any settings here. Just click "OK". Dynamic IP is the method of accessing Internet commonly used in hotels and restaurants and other public places. DHCP mode Network Name OK Cancel c) PPPoE If you access internet by "ADSL virtual dial-up" approach, you only need to type account information provided by your ISP in the "User Name" and "Password" input boxes, and after that the setup is - 14 -