Pyle PCA12BT User Manual - Page 4

LIMITED WARRANTY Sound source or speakers may not be connected properly. Master volume control may be set to a minimum. The amplifier is shutting down or powering off 5 Adjust the volume control to a higher setting. Make sure that the speakers that you have connected to the amp are matching in impedance. Turn the amplifier off and let it cool, make sure that the amplifier is properly ventilated, and then turn it back on. Output power, 2 channels driven 4-ohm, 1 KHz 1% THD. 15 Wx2 4-ohm, 1 KHz 10% THD. 10.1 Wx2 Peak Power 25 Wx2 Total Harmonic Distortion, 1 KHz Rated Power 0.3% Input Sensitivity, 1 KHz, 4-ohm Rated Power 150mV Frequency Response 20Hz-40KHz Signal to Noise Ratio 75dB Power Requirement 120V AC 60 Hz or 230V AC 50Hz Dimensions 5.6" x 2.6" x 4.2" inch 6