Pyle PDKWM806B Instruction Manual - Page 3
Handheld Microphone, Operation, Receiver
View all Pyle PDKWM806B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
HANDHELD MICROPHONE 1. Grille (capsule inside) 2. Power/low battery Indicator 3. Power ON/OFF/MUTE Switch 4. Battery Compartment/Cover 1 23 4 Operation 1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and then close the cover. Pay attention to the correct polarity. 2. Slide power switch to "ON" position to turn on the microphone. Power indicator will ash once and then go o . This indicates correct operation. 3. Now receiver RF indicator should light. Please con rm frequency of microphone same as the receiver before operation. 4. Slide power switch to center "MUTE" position to mute the sound. 5. During operation if power indicator lights red, this indicates the battery is Iow. Please replace new battery. 6. If the microphone is not going to be used for any length of time, please slide power switch to OFF position and remove the battery. RECEIVER Front Panel 34 567 1 2 8 9 10 11 12 13 Rear Panel 14 15 16 17 18 19 20 21 4 www.PyleUSA.com 1. Main Power: Press to switch the unit power to ON and OFF. 2. ECHO: Rotate the echo knob to your desired level. 3. RF 1: The indicator will light red when wireless microphone 1 is on. 4. AF 1: The indicator will light green when speak to wireless microphone 1. 5. BT: When main power is ON, the indicator will ash blue fast to be ready to connect BT audio device. After BT audio device is connected the indicator will light constant blue. When audio device is playing the indicator will ash blue slowly. 6. RF 2: The indicator will light red when wireless microphone 2 is on. 7. AF 2: The indicator will light green when speak to wireless microphone 2. 8. W/MIC 1: Rotate to adjust the volume of the wireless microphone 1 and wired dynamic MIC 1. 9. W/MIC 2: Rotate to adjust the volume of the wireless microphone 2 and wired dynamic MIC 2. 10. TONE: This control is used to adjust the bass, treble quality of the microphone sound. The bass is decreased and treble is increased when the control turned clockwise. The bass is increased and treble is decreased when the control turned counter clockwise. 11. MUSIC: Rotate to adjust the volume of music. 12. MIC IN 1: Insert the 6.3mm plug of wired dynamic MIC into MIC 1 Jack. 13. MIC IN 2: Insert another 6.3mm plug of wired dynamic MIC into MIC 2 Jack. 14. ANT. B: Receiving antenna of the wireless microphone 2. 15. Video input jack (RCA type): Connect this RCA Jack to DVD, Streamer, Set-Top Box or any other A/V source for video in. 16. Audio input jack (RCA type): Connect this set of RCA Jack to DVD, Streamer, Set-Top Box or any other A/V or Audio source for audio in. 17. Video output jack (RCA type): Connect this RCA Jack to TV or Screens for video out. 18. Audio output jack (RCA type): Connect this set of RCA Jack to Active Speakers, Hi Fi system for audio out(mixed music and MIC signal). 19. AF OUT (6.35): Alternatively connect this jack to MIC IN of your amplier for audio out (mixed music and MIC signal). 20. DC IN: Connect DC jack of supplied AC / DC adapter to this jack. 21. ANT. A: Receiving antenna of the wireless microphone 1. www.PyleUSA.com 5