Pyle PDMM01 PDMM01 Manual 1 - Page 5
Operation
![]() |
View all Pyle PDMM01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Operation 1. Power Press the ON/OFF button to turn power on or off. The meter will perform a short self-test when turned on. The meter defaults to the setting used during the last operation. 2. Zero Adiust and Offset Before use and without fittings attached to the meter, press the HOLD button for more than 2 seconds to zero the meter. The meter will reset and display "000" from right to left. 0 .000 will be display. If it is desired to offset the meter and display, press the DIF button while taking a measurement subsequent reading will be the difference between the current measurement and the measurement that was on the display when the DIF button was pressed. 3. Data Hold Press the HOLD button momentarily to freeze the displayed reading the HOLD icon will appear on the upper left-hand side of the display. press the HOLD button again to return to normal operation. 4 Record The MAX/MIN mode allows the user to view only the highest (MAX), lowest (MIN) or anerage (AVG) readings with relative time stamp. 1. Press the REe button once and REe appears on the display (All other Functions are locked out except for Power & Backlight) . The relative time clock also appears in the secondary display and starts counting . 2 . Press the REe button again and MAX appears on the display. The Display is now showing the maximum pressure and relative time it was recorded . 3
![](/manual_guide/products/pyle-pdmm01-pdmm01-manual-1-dc5754c/5.png)