Pyle PDMT02 PDMT02 Manual 1 - Page 1
Pyle PDMT02 Manual
![]() |
View all Pyle PDMT02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
INSTRUCTION MANUAL POCKET AUTORANGING DMM PDMT02 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information. This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be present. Double insulation Safety Precautions 1. Improper use of this meter can cause damage, shock, injury or death. Read and understand this users manual before operating the meter. 2. Make sure any covers or battery doors are properly closed and secured. 3. Always disconnect the test leads from any voltage source before replacing the battery or fuses. 4. Do not exceed the maximum rated input limits. 5. Use great care when making measurements if the voltages are greater than 25VAC rms or 35VDC. These voltages are considered a shock hazard. 6. Always discharge capacitors and remove power from the device under test before performing Capacitance, Diode, Resistance or Continuity tests. 7. Remove the battery from the meter if the meter is to be stored for long periods. Specifications Electrical Specifications Function Range DC Voltage 400.0mV 4.000V, 40.00V, 400.0V, 500V AC Voltage 40-60Hz 4.000V, 40.00V 400.0V, 500V Resistance 400.04.000k, 40.00k, 400.0k 4.000M 40.00M Capacitance 4.000nF 40.00nF Accuracy (0.7% rdg + 3d) (1.0% rdg + 3d) (1.3% rdg + 3d) (1.0% rdg + 10d) (2.3% rdg + 5d) (2.0% rdg + 5d) (5.0% rdg + 5d) (10.0% rdg + 5d) (5.0% rdg + 30d) Frequency Duty Cycle 400.0nF 4.000µF, 40.00µF, 200.0µF 5.000Hz, 50.00Hz, 5000.0Hz, 5.000kHz, 50.00kHz, 500.0kHz, 10MHz 0.1-99% (3.0% rdg + 15d) (10.0% rdg + 15d) (2.0% rdg + 5d) www.pyleaudio.com Description Meter Description 1. 3 3/4 Digit (4000 count) 2. RELATIVE button 3. SELECT button 4. DATA HOLD button 5. Hz/DUTY button 6. Function switch 7. Plastic case 8. Test leads Max input voltage 500V AC/DC Input Sensitivity, 10Vrms min. 99.99KHz Diode Test Test current 1mA max., open circuit voltage of 1.5V typical Continuity Check Audible signal if the resistance is < 60 Display 4000 count 3 ¾ digit LCD Over range indication LCD displays "OL" Polarity Minus (-) sign for negative polarity. Low Battery Indication "BAT" symbol indicates low battery condition. Battery CR2032 3V Lithium Operating Temperature 32oF to 104oF (0oC to 40oC) Storage Temperature 14oF to 122oF (-10oC to 50oC) Weight 1.7oz (50g) Size 4.25x2.2x.5" (108x56x11.5mm) Standard IEC1010 CAT II 500V Pollution degree II, CE Approved
![](/manual_guide/products/pyle-pdmt02-pdmt02-manual-1-ea74564/1.png)