Pyle PDWR30B Instruction Manual - Page 1

PDWR30B • Excellent for Use On Boats/ Marine/ Decks/ Patios/ Poolside/ Outdoors • Completely Water Proof • 3.5'' Aluminum Injection Cone Woofer • 40 Oz. Magnet Structure • 1'' High Compliance Myiar Tweeter • Capacitor Crossover Network • Bass Re ex Vent for Added Bass Response • Heavy Duty ASB Construction • Quick Connect/ Disconnect Speaker Terminals • Unique Spring Loaded Mounting System • Removable Rustproof Mesh Grills • Power: 150Watts RMS/ 300Watts Peak • Frequency Response: 60-20K Hz • Impedance: 4 Ohms • Dimensions: 4.75''(W)x 7.25''(H) x 4.75''(D) HOW TO INSTALL MOUNTING THE BRACKET 1. Remove the bracket knobs and the bracket from the speaker. MOUNTING 2. Hold the bracket up to the mounting surface. "PDWR30B Waterproof Speakers" can be mounted either horizontally or verticalIy, hold the bracket so that the speaker wire ts through the large, circular wire hole in the bracket, align the bracket to be square with the surrounding (Use A level for accuracy) 3. Mark the locations of the three shaped screw holes, use all of the holes. 4. DrIII pllot holes Into the mounting surface. 5. Gently pull the speaker wire though the wire hole in the center of the mounting bracket, so that the holes all line up. 6. Use your hardware to attach the bracket to the mounting surface. www.PyleUSA.com