Pyle PDWR30B Instruction Manual - Page 2
Questions? Issues?
View all Pyle PDWR30B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
FINAL ADJUSTMENTS 1. After checking that the speaker is in-phase and works correctly, angle the speaker for the best sound. 2. Hand tighten rhe bracket knobs only, power tools may over-tighten rhe knob, and strip the threads of the insert. 3. Check that the entire installatlon is safe and secure. CONNECTING YOUR SPEAKERS Connecting the speakers to your amplifier or receiver. • First turn your ampli er OFF to avoid damage which may result from accidental shorting of the speaker leads. • Correct phase polarity is critical for proper stereo imaging and bass performance. The red (+) terminal on your ampli er or receiver must be connected to the red (+) terminal on your speaker, the same applies for the balck (-) terminal. • Connect one loudspeaker at a time to ensure proper connection of left and right channels. Make sure all wires are rmly fastened. • If you notice a high lavel of bass or central image focus, double check your connections for proper polarity. 3 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected] www.PyleUSA.com