Pyle PHITB65BK User Manual - Page 12

broadcasting stations. RECALLING PRESET MEMORY CHANNELS In radio mode, recall the pre-set channels by pressing the MEM- OR MEM+ Button of the remote or MEM/STOP of the panel. LISTENING TO A BLUETOOTH ENABLED DEVICE 1. If the PHITB65BK has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the PHITB65BK with your Bluetooth device. • Press the button to turn on the unit. • Tap the Source Button to select Bluetooth mode. The icon will show on the LED display and blue led light will flash FAST .it means PHITB65BK waiting for pairing. Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find the unit. • Select " PHITB65BK" from the device list when it appears on your device screen. If required, enter the pass code "0000" to pair (link) the unit with your device. • Your will hear one beep sound. Then blue led light will light steadily. It means successfully pairing. Note:  If you can't pair the PHITB65BK with your Bluetooth enabled device, you can try to turn Off & On the power of your unit  press PAIRING BUTTOM, it will disconnect with your bluetooth device.  On bluetooth mode, the PHITB65BK does not pair any bluetooth device after about 25 seconds, it will turn to alternate red and blue led light flashing. If the PHITB65BK still not pair any bluetooth device after about 3 minutes, the bluetooth turn to sleep mode. 2. If the PHITB65BK had been paired before : Turn on the unit and tap the Source Button to select Bluetooth mode, The unit is searching the last paired device. Once it is found, blue led light will light steadily 3. After successfully pairing (linking), you can begin playing music from your 11