Pyle PHSI50B PHSI50B Manual 1 - Page 7

Multi-function Control Area 1. " ": Select the following four submenu: , , , . Or enter to the next menu. 2. " ": Return to the previous menu. 3. " ": Adjust settings. For example: a. When you want to set the time, press the " " key and scroll to the menu by press " ", followed by the " " key to enter time setting mode. Press " " to reset the figures of hours, then press the " " key to set the minutes, after reset it, press " " key again, the time on the screen will flicker continuously to confirm successful time setup. b. When you want to change the tone settings, scroll to the menu and press " " to enter the "tone menu". Press the " " key to scroll through the three options: , , . If you want to adjust the , press " " to enter the "SW menu", press " " to adjust the volume. c. When you want to set the alarm sound module, scroll to the menu and press " " to enter the "source menu". Press the " "key to scroll through the three options: , , . If you want to choose , press " " then the LCD flicker, it suggest this function has finished. The other two options have the same operation. d. When you want to set the alarm, press the " " key and scroll to the menu by press " ", followed by the " " key to enter alarm setting mode. Then Press " " to adjust the hours, then press " " key to toggle to the minutes setting. Press " " key after adjusting the minutes setting, the time on the screen will flicker momentarily to confirm successful alarm setup. After setting alarm, press the" " key to turn the alarm on. When alarm is on, the " " logo will flash all the time, press the" " key to turn off the alarm, if you choose alarm sound module, the system will turn to FM input mode and mute state; if you choose alarm sound module, the system will turn to the previous input mode; if you choose alarm sound module, the system will turn to iPod input mode. iPod Control Area a. Insert iPod into the iPod docking socket. System will turn to "iPod" input mode automatically. And the system will return to the previous input mode when you move out of the iPod. b. The middle area of the remote control (B) is especially designed for iPod player Controls the play and pause function of the iPod player. " : Press and hold for 2 seconds to Fast Forward or Fast Reverse. " : Controls the iPod player to play the previous or the next song. .6.