Pyle PIP711 PIP711 Manual 1 - Page 6

Multi-function Control Area 1. " ": Select the following four submenu: , , , . Or enter to the next menu. 2. " ": Return to the previous menu. 3. " ": Adjust settings. For example: a. When you want to set the time, press the " " key and scroll to the menu by press " ", followed by the " " key to enter time setting mode. Press " " to reset the figures of hours, then press the " " key to set the minutes, after reset it, press " " key again, the time on the screen will flicker continuously to confirm successful setup. b. When you want to change the tone settings, scroll to the menu and press " " to enter the "tone menu". Press the " " key to scroll through the three options: ,, . If you want to adjust , press " " to enter the "SW menu", press " " to adjust the volume. c. When you want to set the alarm sound module, scroll to the menu and press " " to enter the "source menu". Press the " "key to scroll through the two options: , . If you want to choose , press " " then the LCD flicker, it suggest this function has finished. The other options have the same operation. d. When you want to set alarm, press the " " key and scroll to the menu by press" 1 ", followed by the " " key to enter alarm setting mode. Then Press " " to adjust the hours, then press " " key to toggle to the minutes setting. Press " " key after adjusting the minutes setting, the time on the screen will flicker momentarily to confirm successful alarm setup. After setting alarm, press the" " key to turn the alarm on. When alarm is on, you can press the" "; " " or " " key to turn off the alarm, if you choose alarm sound module, the system will turn to FM input mode; if you choose alarm sound module, the system will turn to iPod input mode. FM Control Area a. Press " " and select FM mode, the LCD will display the last tuned channel, for example: 87.50MHz. b. Use " , " to adjust radio frequency. c. The number keys (1-10) are used to save up to 10 channels. Tune to your desired FM channel and hold one of the number keys for 2 seconds to assign that number key to that channel. Anytime you want to listen to the saved channel, just press on the assigned key number. .5.