Pyle PKRK212 User Manual - Page 3
Using the Wired Microphone
View all Pyle PKRK212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Instructions Turning ON/OFF The PA speaker can be powered when connected to main power or using the internal 12V battery. 1.Connect the power cable to the top of the unit. 2.Connect the other end of power cable to main power. 3.Turn on the switch for the main power. 4.The unit will automatically power on when connected to main power. Notes: If you wish to use the internal battery power of the unit, just simply turn on the Battery switch located on the top of unit to ON. Charging Before using the PA speaker for the first time, charge the unit at least 8 hours. 1.Connect the power cable to the top of the panel. 2.Turn off the battery switch on the top of the panel. 3.Recharge indicator light will be on when unit is charging. Notes: Notes: The internal battery will charge while the unit is being operated and the power switch is on. It is better to charge the unit while the power switch is off. Instructions Using the Wireless Microphone The PA speaker comes with wireless microphones to get you started straight out of the box. 1.Tune on the unit. 2.Unscrew the bottom of the microphone to access the battery enclosure. Insert 2XAA batteries into the microphone. Take note the battery polarity when inserting the batteries. 3.Replace the bottom microphone cover. 4.The wireless microphone will flash once and automatically pair with the PA speaker, it is ready to use. If it does not flash, check that you have inserted the batteries correctly or replace old batteries. 5. Adjust the volume of the microphone by turning the MIC VOL knob located on top control panel 3 Notes: Please do not operate the microphone directly in front of the PA speaker, please set the MIC VOL/ECHO at a lower level before turning on the wireless microphone. Operating the microphone incorrectly will cause a loud squealing noise. Please turn off the power switch when the wireless microphone is not in use. This will save the battery. Instructions: Using the Wired Microphone You can connect the wired microphone to this unit using the MIC INPUT located on the top of control panel. 1.Turn off the unit. 2.Connect your wired microphone to the MIC INPUT located on top of the control panel. 3.Adjust the microphone volume by tuning the MIC VOL/ECHO knobs located on top control panel. NOTES: You can use the wired microphone and wireless microphone at the same time. Connecting a Guitar You can connect your Guitar to unit using the 1/4" GUITAR INPUT plug. 1.Turn on the unit. 2.Connect your guitar cable to GUITAR INPUT port on top control panel. 3.Adjust the volume by turning the GUITAR VOL on top control panel. Instructions USB/SD Card Playback You can play music from USB stick or SD Card using the USB/SD slot on the PA speaker. 1.Turn on the unit. 4