Pyle PKWTK75 Instruction Manual - Page 7

• Boil-Dry Protect Should you accidentally allow the kettle to operate without water, the boil -dry protection will automatically switch it o . If this should occur, allow the kettle to cool before lling with cold water and re-boiling. • Care and Cleaning Always disconnect the appliance from the power outlet before cleaning. Never immerse the kettle or cord in water, or allow moisture to contact with these parts. • Removal of mineral deposits Mineral deposits in tap water may cause the kettle interior to discolor. To remove this build-up, use Liquid Descaler, a simple to use non-toxic cleaner. Alternatively: 1. Fill the kettle with 3 cups of white vinegar and the remainder with water and be allowed to stand overnight. DO NOT BOIL. 2. Empty the solution from the kettle. Any stains remaining inside the spout can be removed by rubbing with a damp cloth, ll the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use. The outside of the kettle can be wiped over with a damp cloth. Cleaning appearance of housing Wipe the appearance of housing with a wild and damp cloth or cleaner, never use a poisonous cleaner. Cleaning the lter Remember to clean the lter with a wild and damp cloth at intervals. The lter can be detached for easier cleaning simply by pulling it out. 7 www.PyleUSA.com