Pyle PL78DLB PL78DLB Manual 1 - Page 9

3 Use the number button to input desired sequence number of title/chapter/ track with desired sequence. 4 Use the direction button to move cursor onto Play item, then press the PLAY button on remote or tap the to play the programmed in programmed order. After input a track number, tap the to turn to next sequence number, tap to cancel inputting. * To exit program playback, press the PROG button or tap the ESC to exit. * To change the programmed sequence, move the cursor onto the item you want to change, input the desired sequence number. * During JPEG playback, press the PROG button to change the mode of refresh picture. 4.15 ID3 Function In MP3/WMA mode, during playback, the information of the file name, folder name, song s title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not. 4.16 System Menu Setup Operation 1. Press the SETUP button on the remote controller to access the System Menu on the monitor. 2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. * Press the < button to return to the upper level. * Press the SETUP button again to exit the System Menu. For the System Menu, there are 6 setup pages in all. They display as follows: 10.To reset the unit when the display is incorrect, or the function buttons are not effective or sound is distorted, press the REL button to detach the front panel from the unit and remove it, then use the sharp end of a thing to press the RESET button, which will reset to factory default, and re-instate the correct functions. 11.To adjust sound modes To adjust the sound modes, briefly and repeatedly press the SEL button on the front panel to select one of the sound modes such as : VOL, BAS(without preset EQ), TRE (without preset EQ), BAL, FAD . 12. To do setup In setup mode, select the GENERAL, TIME, AUDIO, VIDEO, RADIO, CALIBRATE as follow: GENERAL SETUP Wallpaper: this function allows to choose the display background. Logo: this function allows to choose the starting screen. Beep: choose the buttons' sound on/off GENERAL SETUP CLOCK SETUP Clock time: adjust the clock. AUDIO SETUP Loud: choose between Loudness ON/OFF. EQ: choose between the different types of EQ. CLOCK SETUP VIDEO SETUP Standard video Brightness Contrast Saturation Hue AUDIO SETUP RADIO SETUP Radio region: choose the radio zone. CALIBRATE calibrate the TFT display as the arrow. VIDEO SETUP RADIO SETUP PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com CA L I B R AT E