Pyle PLMCWD25 Instruction Manual - Page 5

FUNCTIONS * Optional feature REMOTE ENGINE START (PLMCWD25/75) Press button 3 twice, the engine will start and run for 8 minutes. Engine will turn off after 8 minutes and alarm will return to previous status. During the 8 minutes, if you insert the key and turn to ON, the engine will keep running. KEYLESS DRIVING (PLMCWD25/75) To drive the motorcycle after Remote Starting: Press button 3 one time, siren will chirp once for confirmation, turn ignition key to the ON position. NOTE: Do not turn the key to the START position as the engine is already running. Once the ignition key is turned on, shift the motorcycle into the proper gear and you may now drive the motorcycle ...into the sunset! NOTE: If you press Button 2 prior to turning on ignition, engine will turn off. REMOTE ENGINE SHUTDOWN If the motorcycle has been remotely started and you desire to turn the motorcycle off, simply press button 2 LED INDICATOR - 2-WAY ONLY In arming mode, the LED indicator will flash once every 2 seconds. If the alarm was triggered while away from the motorcycle, the LED will flash twice every 2 seconds prior to disarming the alarm. REMOTE CONFIRMATION The built-in LCD display provides visual confirma- tion of system operations and status. After a function such as arming is selected, the LCD display will show confirming icons to indicate that the function has taken place. The LCD display shows any intrusion attempts as they occur. In addition to LCD display, the 2-way transmitter also provides audible and vibration alert in case the display is out of view. For nighttime use the LCD is equipped with a backlight feature. SYSTEM STATUS RECALL Real-time system status can also be recalled at any time by pressing transmitter button 3 for less than one second. The system's current status will be shown on the LCD display SETTING CLOCK Press Lock and Unlock button together for 2 seconds, the transmitter will emit an ascending tone, the hour display will begin flashing, press lock button to select between hour or minute setting, Press the Unlock button to advance hour and minutes. Press and hold Lock and Unlock buttons for 2 seconds to save time. Time setting: 24 hour setting RANGE INDICATION The LCD display has an antenna icon that has 3 bars, to indicate the transmitter is in-range of the motorcycle. If the transmitter is not in-range of the motorcycle the bars will disappear. BUILT-IN SHOCK SENSOR ADJUSTMENT The system's built-in shock sensor has 8 levels of 5