Pyle PLMCWD75 Instruction Manual - Page 8
Troubleshooting
![]() |
View all Pyle PLMCWD75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Troubleshooting 1). Transmitter is ineffective or the control distance decreased significantly. l Tall building, radio tower or high frequency electromagnetic wave may affect the control range. l Low power of the battery. l The transmitter is broken or damaged. l The installation location of the antenna is wrong. You should straighten the antenna and keep it away from other wire harness. 2). The siren does not chirp when the alarm system is triggered. l The wire connection between the siren and ECU has problem. l The siren is damaged. 3). The system gives false alarms when heavy vehicles by passing. l The sensitivity of the sensor is too high. 4) The continuous chirping of the siren cannot be stopped by transmitter after the installation of ECU. l The plug is improperly inserted. l The wire is improperly connected. l The siren is damaged. 5) If the problem persists, please follow these steps l For consumer contact your dealer or nearby service centre. l For installer or dealer email your question to us and we will reply ASAP. 11
![](/manual_guide/products/pyle-plmcwd75-instruction-manual-5bb963e/8.png)