Pyle PMX466 Instruction Manual - Page 2

For the best results and the satisfaction from your new unit, please read this manualthoroughly, and retain it for future reference. ATTENTION To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, Please follow the points as below. OPERATION AND MAINTENANCE • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise. • In order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day). • Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel. • When cleaning the device,use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical impregnated wiping cloths. • Condensation can occur in the device due to rapid, drastic changes in ambient temperature when the device is moved from one location to another, or air conditioner is turned on or off. For example, using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out. • Avoid setting all controls to their maximum. Depending on the condition of the connected devices, doing so may cause feedback and may damage the speakers. • When turning on the power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage. When turning the power off, the power amplifier should be turned off FIRST for the same reason. PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS When connecting the USB2.0 connector to computer, please must abide by following points. If not, it may cause computer crash, breakdown, or losing data. If the computer or mixer crash, please restart the application software or computer operating system, or disconnect the mixer, then power on again. • Use an USB cable. USB 3.0 cable cannot be used. • Before connecting the computer to the USB 2.0 terminal, exit from any power-saving mode of the computer (such as suspend, sleep, standby). 2 www.PyleUSA.com 3 CHANNEL MIXER 4 CHANNEL MIXER www.PyleUSA.com 3