Pyle PRJG48 User Manual - Page 5

2.2 Function Operation 2.2.1 Switch-on and off After powering though the power adaptor, then projector is under standby status. Switch on: Press the power button or the power button on the remote control once, and then the projector is powered on. Switch off: When you want to shut the projector, please press the power button beside the indicate light or the power button on the remote control once, and then the projector is off. 2.2.2 Image Focus Place the projector vertical to the projection screen, and then rotate the lens slightly, until the brilliant image presented. Attention Please connect the power adapter with the projector first, then plug the socket into the outlet. Finally power on the projector. 2.3 Menu Operation A. Signal Source Selection Press signal input selection button on the remote control or input button on the projector, then press up or down button to select the signal source you need, use OK or enter to confirm. B. Sub- menu Adjustment Colo, Im .rn. Asp." 1131110 •Oild wnrren r. cool 0, Press"MENU"enter into the main menu, press " 11/11."button to choose "picture" "sound" " Clock" or " setting" menu to adjust the parameters you need.