Pyle PSTMH22 User Guide - Page 5

Pressing With Steam, Quick Storage

Page 5 highlights

switch is illuminated. Steam will be ready in 40 seconds 7: To steam your garments hold the handle while pressing the steam . 8: When finished using the steamer, turn the Lighted On/Off Switch to the "Off" position. Pressing With Steam 1. To steam a garment, place it on a clean, rust-free clothes hanger, and place the hanger on the Clothes Hanger Hook. For horizontal steam mode place the clothing on a clean, flat surface. CAUTION: Be careful when handling garments on the Clothes Hanger Hook. Pulling on the garment with too much force may cause the unit to tip. CAUTION: Hot Steam may escape from the small holes when steaming. Use caution. 2. Grasp the Handle, and place the Steam Nozzle at the bottom of the garment. Steam will rise along the inside and outside of the fabric, removing wrinkles. Slowly slide the nozzle vertically, from the bottom to the top of the garment. NOTE: Do not allow kinks to form in the hose at any time. 3. Remove the nozzle from the garment, and smooth the fabric with your free hand. 4. Repeat steps 2 and 3 as necessary until the fabric is wrinkle free. 5. Using horizontally keep steam 4 inches above clothing. 6. To remove wrinkles from towels, handkerchiefs, and napkins, drape them over a rod or towel rack, and gently steam. 7. Heavier fabrics may require repeated steaming. 8. To remove stubborn wrinkles, steam both sides of the fabric. 9. The Fabric Brush may also be used to remove tough wrinkles. Quick Storage 1. Turn the Lighted On/Off Switch to "Off". 2. Unplug the Power Cord. 3. Wrap the Hose around the Telescopic Pole one time as shown in manual cover. 4. Hang the Steam Nozzle from the Steam Nozzle Holder. 5. Loosen the top two of the Telescopic Pole by turning them counter-clockwise. 6. Push down on the Pole Top; the pole will collapse to a compact height. 7. Roll the unit to a convenient storage location.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

switch is illuminated. Steam will be ready in 40 seconds
7: To steam your garments hold the handle while pressing the steam .
8: When finished using the steamer, turn the
Lighted On/Off Switch
to the “Off” position.
Pressing With Steam
1.
To steam a garment, place it on a clean, rust-free clothes hanger, and place the hanger on the
Clothes Hanger Hook.
For
horizontal steam mode place the clothing on a clean, flat surface.
CAUTION: Be careful when handling garments on the
Clothes Hanger Hook.
Pulling on the garment with too much force may
cause the unit to tip.
CAUTION: Hot Steam may escape from the small holes when steaming. Use caution.
2.
Grasp the
Handle,
and place the
Steam Nozzle
at the bottom of the garment. Steam will rise along the inside and outside of
the fabric, removing wrinkles.
Slowly slide the nozzle vertically, from the bottom to the top of the garment.
NOTE: Do not allow kinks to form in the hose at any time.
3.
Remove the nozzle from the garment, and smooth the fabric with your free hand.
4.
Repeat steps 2 and 3 as necessary until the fabric is wrinkle free.
5.
Using horizontally keep steam 4 inches above clothing.
6.
To remove wrinkles from towels, handkerchiefs, and napkins, drape them over a rod or towel rack, and gently steam.
7.
Heavier fabrics may require repeated steaming.
8.
To remove stubborn wrinkles, steam both sides of the fabric.
9.
The
Fabric Brush
may also be used to remove tough wrinkles.
Quick Storage
1.
Turn the
Lighted On/Off Switch
to “Off”.
2.
Unplug the
Power Cord
.
3.
Wrap the
Hose
around the
Telescopic Pole
one time as shown in manual cover.
4.
Hang the
Steam
Nozzle
from the
Steam Nozzle Holder.
5.
Loosen the top two of the
Telescopic Pole
by turning them counter-clockwise.
6.
Push down on the
Pole Top;
the pole will collapse to a compact height.
7.
Roll the unit to a convenient storage location.