Pyle PT272AUBT Instruction Manual - Page 2

PRECAUTIONS, How to replace the preset radio stations?, Operations Steps, FEATURES

Page 2 highlights

Please read these operating instructions carefully before use. They will acquaint you fully with its features. This product adopts highly advanced digital techniques, high powered, four -channel outputs to be the media center of your living room. It includes an AM/FM tuner, MP3/Wireless BT input headphone jack. This Pyle Pro hybrid ampli er also has sub-out and pre-outs for a variety of applications. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON'T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. THIS DEVISE IS INTENDED FOR CONTINUOUS OPERATION! *Designs and speci cations are subject to change without notice. FEATURES • PRE-Amp with AM/FM Tuner • CPU management of all functions, remote sensor • Digital uorescent output displays all the functions • Separate gain control of pre-amp and subwoofer • All the blue lights and blue rings gain control through LED Dimmer • AM/FM Quartz synthesized Tuner, auto station seek and store, 50 stations storage, with both manuaI and automatic tuning • BT/MP3 Input • Digital karaoke system • Over heat, over current protection • Wireless BT receiver features that make listening to music more convenient 1. Before you can use a Wireless BT device, it must be paired and connected. Make sure that Wireless BT is activated on your device before you begin the pairing process. 2. If a username and password is required, search for Wireless BT Network Name: Pyle Speaker and enter the necessary login "0000" 1 www.PyleUSA.com PRECAUTIONS 1. Power Source: The unit should be connected to a power supply AC-110/60Hz, AC-220V/50Hz. 2. Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls. 3. Water and moisture: The unit should not be used near water-for example, near a swimming pool, in a wet basement, etc. 4. Electric Shock: If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this unit. 5. Enclosure Removal: Do not open the unit as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company. 6. Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pullout the power cord. Contact your dealer or nearest service station. How to replace the preset radio stations? Use the remote control to set the radio stations. NOTE: The preset radio stations can't be deleted, BUT CAN BE REPLACED. Operations Steps: 1. Press TUNER MODE on the remote control 2. Pres AM/FM, and select FM 3. Press PRE/NEXT to select the stations you don't want to keep; 4. Press TUNING again choose the radio stations you want to save 5. Press MEMORY to save the new stations In this way, you can replace the preset radio stations. www.PyleUSA.com 2

  • 1
  • 2
  • 3
  • 4
  • 5

www.PyleUSA.com
1
www.PyleUSA.com
2
PRECAUTIONS
1.
Power Source:
The unit should
be connected to a power supply AC-110/60Hz,
AC-220V/50Hz.
2.
Ventilation:
The unit should
be situated so that its location or position does
not interfere with its proper ventilation. Place the unit at least 10cm away from
the walls.
3.
Water and moisture:
The unit should not be used near water-for example,
near a swimming pool, in a wet basement, etc.
4.
Electric Shock:
If a metal objects, such as a hair pin or a needle, comes into
contact with the inside of this appliance, a dangerous electric shock may result.
For families with children, never permit children to put anything, especially
metal, inside this unit.
5.
Enclosure Removal:
Do not open the unit as this might result in damage to
the circuitry or electrical shock. If a foreign object should get into the unit,
contact your dealer or service company.
6.
Abnormal Smell:
If an abnormal smell or smoke is detected, immediately turn
the power
OFF
and pullout the power cord. Contact your dealer or nearest
service station.
How to replace the preset radio stations?
Use the remote control to set the radio stations.
NOTE:
The preset radio stations can’t be deleted,
BUT CAN BE REPLACED.
Operations Steps:
1. Press
TUNER MODE
on the remote control
2. Pres
AM/FM
, and select FM
3. Press
PRE/NEXT
to select the stations you don’t want to keep;
4. Press
TUNING
again choose the radio stations you want to save
5. Press
MEMORY
to save the new stations
In this way, you can replace the preset radio stations.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK. DON'T EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
THIS DEVISE IS INTENDED FOR CONTINUOUS
OPERATION!
*Designs and specifications are subject to change without notice.
Please read these operating instructions carefully before use.
They will acquaint you fully with its features.
This product adopts highly advanced digital techniques, high powered, four
-channel outputs to be the media center of your living room. It includes an
AM/FM tuner, MP3/Wireless BT input headphone jack. This Pyle Pro hybrid
amplifier also has sub-out and pre-outs for a variety
of applications.
FEATURES
PRE-Amp with AM/FM Tuner
CPU management of all functions, remote sensor
Digital fluorescent output displays all the functions
Separate gain control of pre-amp and subwoofer
All the blue lights and blue rings gain control through LED Dimmer
AM/FM Quartz synthesized Tuner, auto station seek and store, 50 stations
storage, with both manuaI and automatic tuning
BT/MP3 Input
Digital karaoke system
Over heat, over current protection
Wireless BT receiver features that make listening to music more convenient
1. Before you can use a Wireless BT device, it must be paired and connected.
Make sure that Wireless BT is activated on your device before you begin the
pairing process.
2. If a username and password is required, search for Wireless BT Network Name:
Pyle Speaker
and enter the necessary login “
0000