Pyle PT272AUBT Instruction Manual - Page 5

SAFETY INSTRUCTIONS 1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit. 2. When more than one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation. 3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted. 4. For speaker cords, strip o the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause short circuit when wires of di erent terminal contact each other. 5. After the unit is turned ON, adjust the main volume to the desired level same with bass and treble volume, etc. 7 www.PyleUSA.com PT272AUBT Hybrid Ampli er Receiver Home Theater Stereo System, Wireless BT Streaming, MP3/USB/SD Readers, AM/FM Radio, 300 Watt Features: • Home Theater Ampli er Receiver System • Ability to Connect External Devices & Speakers • Built-in BT for Wireless Music Streaming • MP3 Digital Audio File Support • USB Flash & SD Memory Card Readers • AM/FM Radio with LCD Display • (2) 1/4'' Microphone Inputs • RCA (L/R) Audio Input/Output • Banana Binding Post Speaker Output Jacks • Front Panel Button Control Center • Echo, Bass, Treble, Sub, Mic Volume Adjustable • Includes Remote Control & Power Cable Wireless BT Connectivity: • Instantly Receives Wireless Music Streaming • Works with all of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.) • Wireless BT Version: 3.0 • Wireless BT Network Name: Pyle Speaker • Wireless BT Password Required: '0000' (4 Zeroes) Technical Specs: • MAX Power Output: 300 Watt • 30 Watt x 2 @ 8 Ohm • 60 Watt x 2 @ 4 Ohm • Frequency Response: 40-15kHz (+/-2dB) • T.H.D.: