Pyle PT888BTWM Instruction Manual - Page 6

Wireless BT Function 1. The receiver connects to your Wireless BT-enabled device, allowing the system to receive your wireless bt signal and stream audio to any connected speaker system. 2. Press the 'ANALOG INPUT' on the remote control or control panel of the receiver system, then enter to 'BT' mode--as indicated on the display screen. 3. Ensure Wireless BT is activated on your device and search for BT Network named: PYLEUSA 4. No password is required for connecting. ARC (Audio Return Channel) Function The ARC (Audio Return Channel) function makes it easy for the PT888BTWM to play audio from any TV with a single HDMI cable. It can be adjusted either on the front control panel or via the included remote control. Enable your TV to send audio signal upstream to a connected speaker system or AV receiver while eliminating additional cable connections and clutter from an optical audio cable (S/PDIF). ARC audio transmission links your speaker output to your television controls, meaning you do not need an external/additional remote or interface to con gure audio levels. Enjoy an optimal multimedia home theater experience by connecting your television and Hi-Fi equipment into one, seamless entertainment system. FM RADIO Press "AUTO", "TUNE+/-", "CH+/-" button on the remote control. Operate automatic search and save station, manually save and select the stored station function. DSP Sound Field Control Press "DSP"or "CH MODE" on the remote control. 7 di erent sound eld e ects can be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS) NOTE: Pressing those button on the digital input channel is invalid LOUD Press "LOUD ON" on the remote control. The low frequency of this unit can be increased appropriately at low volume. Then press "LOUND OFF" to cancel this function. DISPLAY Press 'DISPLAY' button on the remote conlrol to adjust di erent display mode. RESET Press 'RESET' button on the remote control to restore to the factory setting state. 10 www.PyleUSA.com MUTE Press 'MUTE' button on the remote control to turn ON or OFF MUTE function. STANDBY Press 'STANDBY' button the remote control to turn ON standby state. Press again to cancel standby mode. Troubleshooting Problem No display Probable Cause The power socket is in poor contact or without electricity Solution Check the power supply and plug of the socket. There's display but no sound output 1. The speaker wiring is wrong. 2. The playback source doesn't corresponds to the selected signal state 3. The volume level is in lowest output state. 4. MUTE is activated 1. Connect the speaker line according to the wiring diagram 2. Select the input state which is playing 3. Turn the main volume & adjust the knob clockwise. 4. Disactivate MUTE Remote control doesn't work Out of control 1. The remote transmitter window is not aimed at the local receiving window. 2. There are obstacles between the unit and the remote control 3. Drained remote control batteries Being disturbed or improperly operated 1. Aim at the host receiving window. 2. Remove obstacles 3. Replace new battery Turn it OFF and than turn it ON Sound distortion Main volume adjustment is too much Turn down the main volume The channel sound is wrong Channel sound mode is not correct Press 'CH. MODE' on the panel or remote control Music les in USB can't be played for The USB les is not supported long period of time Delete unsupported les The phone cannot transmit audio to the ampli er via BT. 1. The BT function of mobile phone is not opened. 2. No music is played on the phone. 3. Ampli er BT is not paired with mobile phone BT. 4. Incorrect ampli er input channel 5. BT can't connect. 1. Turn ON BT. 2. Open the phone and play music 3. Rematch BT connection 4. Switch the ampli er input into 'BT' channel. 5. Turn o other BT devices If you are still experiencing issues, please contact your authorised local dealer or contact us on www.PyleUSA.com. www.PyleUSA.com 11