Pyle PTTCSM60 PTTCSM60 Manual 1 - Page 7

 PRESS THE " DUBBING " BUTTON (23) TO " HI " POSITION AND THEN FOLLOW THE SAME PROCEDURES AS STIPULATED IN "DUBBING AT NORMAL SPEED".  WHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL.  DO NO ACTIVE/DE-ACTIVE THE "HI-NOR. DUBBING" BUTTON DURING DUBBING, THIS WILL VARY THE SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE. B. RECORDING FROM RADIO  SELECT " TUNER " FUNCTION (6).  TUNE TO THE DESIRE STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1.  PRESS "RECORD" & "PLAY" KEY TO START RECORDING.  PRESS "PAUSE" KEYS AND THEN "STOP/EJECT" KEY WHEN FINISH. C. RECORDING FROM PHONO  SELECT "PHONO" FUNCTION (6).  INSERT A BLANK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.  PRESS "PAUSE" KEY FIRST AND THEN "RECORD" & "PLAY" KEY AT CASSETTE. RECORDING FUNCTION IS NOW STAND BY.  START THE PLAYBACK AT PHONO AND THEN PRESS "PAUSE KEY" AT CASSETTE TO START RECORDING.  TO STOP RECORDING, PRESS "PLAUSE " KEY AND THEN "STOP/EJECT" KEY ON CASSETTE TAPE DECK FIRST, THEN RETURN THE TONE ARM BACK TO THE REST STATION AT PHONO. ENCODING OF PHONO OR CASSETTE TAPE INTO MP3 FILE THE SYSTEM IS ABLE TO ENCODE RECORD (FROM PHONO) AND CASSETTE DECK FILE (FROM TAPE) TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH USB CONNECTING PORT OR SD/MMC CARD. A) CD ENCODING I) RECORDING 1 TRACK 1. PLAY THE CD TRACK YOU WANT TO ENCODE/RECORD, AS NORMAL. 2. PRESS THE " RECORD " BUTTON (3) DURING PLAYBACK OF THE DESIRED TRACK 3. " " & " " WILL BE FLASHING ON THE LCD DISPLAY TO SHOW ENCODING IS IN PROGRESS. 4. AFTER THE ENCODING PROCESS HAS FINISHED, THE UNIT WILL STOP PLAYBACK AUTOMATICALLY. II) RECORDING THE COMPLETE CD 1. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE CD TRAY & THEN CLOSE THE CD DOOR. 2. AFTER DISC SEARCH HAS BEEN COMPLETED, PRESS THE " RECORD " BUTTON (3) - NOTE: DO NOT PRESS "PLAY" AND THEN "RECORD", OR ONLY THE SELECTED TRACK WILL BE RECORDED. 3. " " & " " WILL BE FLASHING ON THE LCD DISPLAY TO SHOW ENCODING IS IN PROGRESS. 4. AFTER THE ENCODING PROCESS HAS FINISHED, THE UNIT WILL STOP PLAYBACK AUTOMATICALLY. III) ENCODING BY PROGRAM 1. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR 2. SELECT THE DESIRE TRACKS BY FOLLOWING " CD DISC PROGRAMMING " PROCEDURES. THEN PRESS " CD PLAY/PAUSE/STOP " BUTTON (16) TO START PLAYBACK. 3. DUYING CD PLAYBACK, PRESS AND HOLD THE " CD PLAY/PAUSE/STOP " BUTTON (16) FOR 2 SECONDS TO ENTER THE STOP MODE. 4. PRESS THE " RECORD " BUTTON (3) AND THE UNIT WILL DISPLAY " " & " ENCODING IS PERFORMING NOW. AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY. " & FLASHING. REMARK:- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO OR TAPE - DURING COPY MODE, THE SYSTEM WILL COPY THE MP3 FILE ONLY. - THE SYSTEM WILL CRATE A " AUDIO " FOLDER FOR ENCODING FILE AND " FCOPY " FOR COPYING FILE. - THE RECORDING FORMAT IS PRESET AT - MP3 BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ - NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE - TO INTERRUPT THE RECRODING, PRESS THE " RECORD " BUTTON AGAIN DURING RECORD MODE. - THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD SLOT ARE BEING OCCUPLIED DURING ENCODING OF PHONO OR TAPE MODE. - COPY MP3 FILE FROM USB/SD WILL BE SUCCESSFUL ONLY ENTIRE SONG BEING COPIED, IF TERMINATE THE COPYING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE USB OR SD/MMC CARD E-6