Pyle PTTCSM60 PTTCSM60 Manual 1 - Page 8

IV) COPYING OF MP3 FILE IF PUTTING A MP3 DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR SD/MMC CARD IF PRESS THE " RECORD " BUTTON (3). THE OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3 FILE BEING READ. REMARK: - THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD SLOT ARE BEING OCCUPLIED BY STORAGE MEDIA. - IF PRESS THE " RECORD " BUTTON DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY FROM USB TO SD OR SD TO USB. B) PHONO ENCODING 1) PLUG IN THE USB PEN DRIVE FOR RECORDING (MAKE SURE IT AHD ENOUGH EMPTY SPACE). 2) SET THE FUNCTION BUTTON (6) TO " PHONO " POSITION AND THEN PRESS THE " RECORD " BUTTON (3) DIRECTLY. 3) THE LCD DISPLAY (2) WITH SHOW THE WORD " USB " AND FLASHING, AFTER THEN DISPLAY " " & " " AND FLASHING. NOW THE SYSTEM IS STARTING THE ENCODING MODE. 4) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB OR SD CARD. 5) AFTER FINISH OF RECODING, PRESS AND HOLD THE " RECORD " BUTTON (3) UNTIL THE LCD STOP FLASHING AND RETURN TO " PHONO " MODE. C) CASSETE ENCODING 1) PLUG IN THE USB PEN DRIVE FOR RECORDING (MAKE SURE IT AHD ENOUGH EMPTY SPACE). 2) SET THE FUNCTION BUTTON (6) TO " TAPE " MODE AND THEN PRESS THE " RECORD " BUTTON (3) DIRECTLY. 3) THE LCD DISPLAY (2) WITH SHOW THE WORD " USB " AND FLASHING, AFTER THEN DISPLAY " " & " " AND FLASHING. NOW THE SYSTEM IS STARTING THE ENCODING MODE. 4) START PLAYBACK OF CASSETTE TAPE(AT EITHER DECK 1 OR 2) WHICH THE TRACK YOU PREPARE TO ENCODING TO MP3 FORMAT. 5) AFTER FINISH OF RECODING, PRESS AND HOLD THE " RECORD " BUTTON (3) UNTIL THE SYMBOL " " & " " DISAPPEAR AND REUME TO " TAPE " MODE ON LCD DISPLAY (2). D) FILE COPY FROM USB TO SD OR REVERSAL THE SYSTEM ALLOW TO COPY THE FILES FROM THE USB SORUCE TO SD/MMC CARD BY PRESSING THE " RECORD " BUTTON (3):- I) COPYING 1 TRACK (ASSUME COPY FROM SD CARD TO USB MODE) 5. PERFORM NORMAL PLAYBACK OF THE TRACK AT SD/MMC CARD YOU WANT TO COPY, 6. PRESS " RECORD " BUTTON (3) DURING THE PLAYBACK OF THE DESIRE TRACK, UNIT WILL DISPLAY " " & " " AND FLASHING. COPYING IS PERFORMING NOW. 7. AFTER COPYING IS COMPLETED, UNIT WILL STOP PLAYBACK AUTOMATICALLY. II) COPYING ALL TRACKS (ASSUME COPY FROM SD CARD TO USB MODE) 5. SELECT " SD " MODE AND THEN INSERT THE SD/MMC CARD YOU WANT TO COPY. 6. AFTER READING OF CARD INFORMATION IS COMPLETED, PRESS THE " RECORD " BUTTON (3) AND THE UNIT WILL DISPLAY " " & " " AND FLASHING. COPYING IS PERFORMING NOW. 7. AFTER COPYING IS COMPLTED, UNIT WILL STOP AUTOMATICALLY. E) ENCODING BITRATE (BY REMOTE HANDSET) YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING, THE HIGHER BIT RATE WILL GENERATE BETTER SOUND QUALITY AND OCCUPY MORE SPACE OF MEMORY. THE SELECTABLE RANGE IS FROM 32 / 64 /96 /128 / 192 / 256 KBPS RESPECTIVELY 1) SET IN " PHONO " FUNCTION (6) & REMAIN STOP MODE. 2) PRESS THE " INFO " FUNCTION AND THE LCD DISPLA (2) WILL SHOW THE DEFAULT BITRATE (128 KBPS) 3) PRESS SKIP OR BUTTONS (13,24) TO SELECT THE DESIRE BITRATE FOR ENCODING. 4) PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (2) WILL RESUME TO " PHONO " MODE F) TRACK SEPARATION (BY REMOTE HANDSET) YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO OR TAPE TO USB/SD TRACK BY TRACE DURING ENCODING. EVERY TIME WHEN PRESS THE " " (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET DURING ENCODING FROM PHONO OR TAPE TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND CONTINUOUS THE RECRODING. THE TEXT " PHONO " OR " TAPE " AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY. E-7