Pyle PUCRC25 Instruction Manual - Page 7

RECHARGING BATTERY 1. Before charging, make sure the battery is correctly installed. 2. The procedure of charging the product is as follows: rstly, connect the adapter output into the DC jack, and then plug into power socket of the other end, a blue light will ash. 3. After fully charged, the indicator light will turn to solid blue light. 4. When the product runs out of power, LED indicator will turn red/purple which prompts the user to charge the product. 5. To ensure the best performance and lift span of the battery, please charge the product for at least 3 hours continuously. After fully charged for 3 hrs, indicator light will turn to solid blue light. The product can do cleaning after 3 hours charging. Adapter Plug Outlet Adapter Plug NOTE: a. Make sure the robot will fully charge not less than 8 hours for the rst time. b. When the battery is low, please charge as soon as possible: c. If you are not using the robot for an extended period of time, please fully charge the battery and remove it, put it in a well ventilated and dry place. d. If the robot will not be used for more than 3 months, please charge the robot using the adaptor for 8 hours. www.PyleUSA.com 7