Pyle PVR300 Instruction Manual - Page 11

Operation * Backlight: set the LCD backlight time for always open, 10secs., or 30secs.. * Contrast Set: adjust the LCD contrast from 1 to 15 by UP/ DOWN key, then press PLAY/PAUSE key to confirm. * Restore Default: select to recover the factory setting or not. * Memory Info: to show the current memroy info.. * Password off/on: Set the power-on password on or off. * Password Set: Adjust the data by UP/DOWN key, and press VOL key to skip to next data, then press PLAY/PAUSE key to confirm ( Be valid only when you set the "Password on".). If you need to change the password, just enter into Password Set and follow the prompt "Input old Password", then press PLAY/PAUSE key to confirm, and then reset it. Download and upload files Press down and push the USB plug switch to open the USB plug.Connect this unit to the USB interface for computer connection. Copy (recording) files to a removable disk or computer, or copy music files (.wav) to your recorder according as your demand. After finishing your operation, disconnect the unit with your PC by the Safety Remove Hardware procedure.