Pyle PWMA220BM Instruction Manual - Page 3

OPERATION ON AC POWER Plug one end of provided AC cord into the AC input jack on the left side of the ampli er. Then plug the other end of AC cord into AC power outlet. Turn on the unit using the power/volume switch. NOTE: To avoid damaging your unit, make sure AC power is same as that marked near AC input jack) OPERATION ON DC POWER This unit can be powered also using external 12V DC power. Connect external 12V DC power to DC input jack on the front of the ampli er. Observe the correct polarity as following. OPERATION ON RECHARGEABLE BATTERY This unit can be powered internally using the built-in rechargeable battery. When AC power is connected, if battery charging indicator lights red, the rechargeable battery is not fully charged and will be allowed to charge while the unit is powered by the AC power. (Note: Turning o the unit power switch will allow the battery to recharge more quickly.) If the battery charging indicator lights green, the battery is fully charged and ready to power the unit alone. Shut o the power switch and disconnect the AC power. Turn the unit back on and the rechargeable battery will power the unit alone. OPERATION ON 'D' BATTERIES This unit can also be powered internally with (6) x 'D' Batteries. Insert the batteries while observing the correct polarity as marked. For longest operation use only alkaline or rechargeable batteries. Replace the batteries when the output volume drops or the range of the wireless decreases. Note: This unit does not recharge batteries. When using 'D' Batteries, do not connect AC or DC power. 3 www.PyleUSA.com CONNECTION • The KEYBOARD IN socket can be connected to a electronics device. • The CASSETTE IN socket can be connected to a cassette player or other audio player. • The REC OUT socket can be connected to a recording device or to the input jack of a power ampli er to further amplify and enlarge the audio power. • The MIC IN socket can be connected to wired dynamic MIC. Keep MIC head away from the speaker of main unit to avoid feedback. BLUETOOTH/MP3 OPERATION 1. Insert ash drive into USB port or Micro SD Memory Card into Micro SD card slot, system will play the music in ash drive or Micro SD Card automatically. If both ash drive and Micro SD Memory Card are inserted, system will play the music in ash drive. To play music in Micro SD Memory Card press MODE button to switch to SD mode. 2. To play music from your mobile phone etc via bluetooth, press MODE button to switch to BT mode. Turn on bluetooth function of your mobile phone and search for Pyle Audio and connect. Then you can play your music in mobile phone. ATTENTION 1. If feedback (howling sound) occurs, try rst turning down the treble control. If feedback still is present, try turning down the volume or repositioning this unit with respect to the wired or wireless microphone being used. 2. Extend the antenna fully whenever using the wireless microphone to ensure optimum performance and maximum range. BELT PACK TRANSMITTER OPERATION Parts Description 1 2 34 1. Power On/O /Mute switch 2. MIC input socket 3. Power/low battery Indicator 4. Gain adjustment 5. Battery compartment/cover 6. Lapel MIC 7. Headset MIC 6 5 7 4 www.PyleUSA.com