RCA 75350 User Manual - Page 5

First Things First CABINET OVERHANG WASHER CABINET BOTTOM EN EQUAL TO OR LONGER THAN CABINET OVERHANG SPACERS 3/8" MINIMUM 3/4" MAXIMUM 8. Extend cord towards electrical outlet and secure by using the Cord Hooks to hold cord out of the way. For most attractive appearance, place Cord Hooks at back edge of cabinet (on or next to wall) directly over outlet to be used. To attach Cord Hooks, peel off adhesive back and attach to a clean, dry surface on underside of cabinet or back wall. Plug Cord into 120-volt AC electrical outlet. We recommend that the line cord be fully extended for best FM reception. SELECTED SCREWS WHICH MEET MINIMUM, BUT DO NOT EXCEED MAXIMUM LENGHT. 5. Insert screws FROM INSIDE THE CABINET. The washers must be used on metal cabinets, and on wood cabinets if you did not countersink the drilled holes. Position washers, flat side down, and place screws into the holes. If your cabinet does not have an overhang, go to Step 7. 6. Hold screw heads down while you push the selected spacers onto the screws under the cabinet. Be sure to push up spacers until they are firmly against the cabinet bottom and/or fully nested (if more than one is used). 7. Align radio under the screws. Hold the screw holes in the top of the clock radio against the mounting screws and partially tighten the screws. Do not fully tighten until all 3 screws have been started. (The top front edge of the clock radio should clear the overhang.) COMPACT DISC PLAYER CLOCK/TIMER DISPLAY A OF RADI C TIMER ON/SET OF Spacemaker STERE Compact DIsc Player AM/FM Stereo High Performance Sub-woofer F 85 92 96 100 104 108 MH HOU MINUT SE A 530 650 800 1000 1300 1700 kHz STO PLAY/PAUS TRAC SEARC REPEA SHUFFL Getting Started Setting the time The clock setting and daylight saving The time display has a 12-hour format with AM time button is located in the battery and PM indicator. To set the time: 1. Press (inside battery compartment) to enter time setting mode. The red Clock icon will appear on the compartment on the side of the unit. Open the compartment door by rotating the lock in the direction of the arrow . EN display. 2. To set clock time, use the / buttons to select the correct time. Press and hold to fast reverse or fast forward clock time. 3. Press again to save clock time. The red Clock icon will turn off. Tips: In standby mode, press / to show the seconds counter. Daylight saving time (DST) After plugging in your unit, daylight saving time must be activated for those areas observing such change. Press and hold the DAYLIGHT SAVING button until the icon lights on the display. To disable daylight saving time, press and hold again until the icon no longer lights. Warning: Please avoid playing with the button after entering the Clock set mode. 5 6