RCA ANT1250 User Guide - Page 6

ANT1250_IB 7/19/01 9:12 AM Page 6 Tuning and Adjustments Take the following steps to tune and adjust your antenna. 1. Select the channel you want to watch. 2. Turn the antenna power on by switching the 3 position switch to the appropriate position. 3. Move the extended dipoles (channels 2-13) or the loop (channels 14 and higher) until you get the best picture possible. 4. Increase the antenna power by turning the UHF or VHF Power Control Dial clockwise until you get the best picture possible. 5. This process may need to be repeated each time channels are changed. VHF Dipole MIN MIN UHF MAX UHF Loop & Reflector VHF Dipole UHF & VHF Power Control Dial 6 MIN MIN UHF MAX VHF MAX 3 Position Switch