RCA DRC62708 DRC62708 Product Manual - Page 6

B. Using the AC power Adapter The included AC power adapter operates on AC between 100V-120V. • The supplied AC power adapter is suitable for use on AC mains supplies of 100-120 Volts AC and should only be connected to a mains supply within these parameters. DVD Player A DVD Player B 2 To AC wall outlet AC adapter 1 To DC IN 9V-12V jack 2 To AC wall outlet AC adapter 1 To DC IN 9V-12V jack Cautions: • Turn off the unit before unplugging the AC power adapter to avoid damage to the unit. • When the unit is not going to be used for a long time, disconnect the AC power adapter from the AC outlet. • The AC power adapter included with this unit is for its use only. Do not use it with other equipment. IMPORTANT • Be sure to use the unit close to the wall outlet and make it is easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once. • When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main power source, even when the unit is turned off. 6 Connections Playing one DVD on both DVD Player A and B You can watch the same DVD simultaneously on player A and B. DVD Player A Watching same DVD on both Players 1. Connect the DVD Player A and B using the included Audio/ Video cable. 2. Turn on both units. Slide the DVD/AV IN switch on unit A to "AV IN" and place a disc on it. 3. Play the DVD - unit B will display the DVD at the same time. DVD Player B Connecting to a TV If your TV has Audio/Video inputs, you can connect the DVD Players to your TV using the included Audio/Video cable. Watching a DVD on your TV 1. Connect your TV to the DVD players using the included Audio/Video cable. 2. Turn on the DVD players. Slide the DVD/AV IN switch on DVD Player A to "DVD". 3. Turn on the TV and follow the instructions included with the TV for display of content from other sources. Note: • Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal. DVD Player A DVD Player B Connecting to Game Systems/Video Equipments (For DVD Player A only) You can connect game system or other video equipments for playback. Watching video equipment 1. Connect the video equipment with the DVD Player A using the included Audio/Video cable. DVD Player A 2. Turn on the Player. Slide the DVD/AV IN switch to "AV IN". 3. Turn on the video equipment and follow the instructions provided with it to playback. Note: • Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal. • If you have a mono VCR, the volume level from the speakers will be low. Game System/ Video Equipment 7