RCA DRC62708 DRC62708 Product Manual - Page 8
DVD / CD Operation, Unit Operation, Sound, System, Using the Stand for Desktop Use
View all RCA DRC62708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Using the Stand for Desktop Use You can stand the units on a desk or table using the stand on the back. Sound System Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio. The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for twochannel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multichannel soundtracks available on many DVDs. Manufactured under license from Dolby Laboratories. 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. Unit Operation Turning on the DVD Players 1. Slide the STANDBY / ON switch on both players to the ON position. 2. Slide the AV IN / DVD switch on DVD Player A to "DVD". 3. The start-up picture will appear on the screens. Note: • When the unit is not going to be used for a long time, disconnect the AC power adapter from AC outlet. 10 DVD / CD Operation This owner's manual explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD. " " may appear on the screen during operation. A " " means that the desired operation is not permitted by the unit or disc. Playing a Disc 1. Slide the STANDBY/ON switch to the ON position. See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2. 2. Press the button and hold the front panel to open the disc door. 3. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a "click". 4. Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading, for most DVDs, the unit will automatically take you main menu or start playing. If the unit does not automatically start playing the DVD, press the PLAY button. Pausing Playback (still mode) Press the PAUSE button. To resume normal playback, press the PAUSE button, the picture advances one frame on DVD. PLAY button. Each time you press the Stopping Playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button. If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. Skipping to a Different Track • Press the PREV button to go back to previous titles/chapters/tracks. • Press the NEXT button to advance titles/chapters/tracks. • For an audio CD, use the number buttons on the remote control to go directly to the desired track number. Fast Forward / Fast Reverse 1. Press the SEARCH or SEARCH button when a disc is playing. • The disc begins a fast scan at two times normal (x2) speed. • Each time the SEARCH / button is pressed, the speed of the fast scan changes. 2. Press the PLAY button when you have reached the desired point to resume playback at normal speed. Note: • The DVD player mutes sound and subtitles during reverse and forward scan of DVDs. • The fast playback speed may differ depending on the disc. 11