RCA EZ2110RD Quick Start Guide - Page 1

RCA EZ2110RD Manual

Page 1 highlights

v2.0 (1.0.2.0) (EN) English QuickStartGuide EZ2110 Series RCA Small Wonder Camcorder www.mysmallwonder.com Congratulations on purchasing your new RCA High Definition Small Wonder Camcorder. Please read these instructions for quick tips on using the product. The User Manual PDF file can also be found in the camcorder memory under the User Manuals folder. 1. Content of the box • Small Wonder Camcorder • USB cable • AV cable • Tripod mount bracket • 2 GB micro SD card (Installed in device) • Software DVD • User Manual • Quick Start Guide • Owner Registration card • Warranty leaflet 2. Charging your camcorder Please charge the battery for at least four hours before first use. NOTE: The unit is properly charging when you see the animated charging symbol on the Camcorder display. If you do not see this charging symbol, follow these steps: 1. Make sure that you have the camcorder connected to the computer USB port through USB cable, and the computer is turned on. 2. Momentarily slide and hold the Camcorder power switch to the ON position to initiate charging. Lift up the cover USB port of your computer USB cable 3. General controls microSD card slot Recording indicator Microphone Lens * To reset the camcorder (in case it is not functioning properly): Slide and hold the On/off switch for more than 10 seconds. Camcorder strap hole Video quality selector AV output Playback/pause Setup menu Record Audio speaker LCD screen 4. Inserting (or removing) memory card On/off switch* USB and HDMI video output Delete recordings Take photo +/- - Adjust volume during playback/ zoom during record and preview / - Skip to previous or next recording; fast rewind or forward A micro SD memory card (supplied) is recommended for recording. To insert card: Push the card in until a click is heard To remove card: Push card in until a click is heard, then slowly release the card. As card is under minimal tension when locked in memory slot, please use care when removing. As the memory card is small in size, it is recommended to use a small coin to help insert or remove it. 5. Turning on the camcorder The camcorder has two operation modes (Preview and Playback). It is always in Preview mode after switched on. Refer to the diagram below for switching between modes. Switch on Slide and hold until the camcorder turns on or off Press PHOTO Preview mode 1 Take a photo Auto timeout Press PLAY/PAUSE Press PHOTO / Press Record Playback mode 1 In Preview mode, press Record to record a video. 6. Selecting recording quality Preview mode Selected recording quality Battery indicator Memory card indicator Settings Resolutions (pixel) & Frame Rates (FPS) Approx. recording durations on a 2 GB memory card 2 HD 1280 x 720 @ 30fps Up to 1 hours HQ 720 x 480 @ 30fps Up to 1.7 hours WebQ 320 x 240 @ 30fps Up to 5 hours 2 Actual recording time and capacity will vary depending on type of video content being recorded, system requirements, and other factors.

  • 1
  • 2

EZ2110
Series
RCA Small Wonder Camcorder
www.mysmallwonder.com
Congratulations on purchasing your new RCA High Definition Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
The User Manual PDF file can also be found in the camcorder memory under the User Manuals folder.
Please charge the battery for at least four hours before first use.
QuickStart
Guide
1. Content of the box
Small Wonder Camcorder
USB cable
AV cable
Tripod mount bracket
2 GB micro SD card (Installed in device)
Software DVD
User Manual
Quick Start Guide
Owner Registration card
Warranty leaflet
2. Charging your camcorder
3. General controls
Lens
Video
quality
selector
Recording indicator
Microphone
microSD card slot
Camcorder strap hole
On/off
switch*
Delete recordings
Take photo
AV output
Playback/pause
Setup menu
Record
Audio speaker
LCD screen
USB and HDMI
video output
+
/
– Adjust volume
during playback/
zoom during record
and preview
/
– Skip to
previous or next
recording; fast rewind
or forward
* To reset the camcorder (in case it is not functioning properly):
Slide and hold the On/off
switch for more than 10 seconds.
2
Actual recording time and capacity will vary depending on type of video content being recorded, system requirements,
and other factors.
6. Selecting recording quality
Battery indicator
Memory card indicator
Selected recording quality
Settings
HD
HQ
WebQ
Resolutions (pixel) &
Frame Rates (FPS)
1280 x 720 @ 30fps
720 x 480 @ 30fps
320 x 240 @ 30fps
Approx. recording durations
on a 2 GB memory card
2
Up to 1 hours
Up to 1.7 hours
Up to 5 hours
Preview mode
5. Turning on the camcorder
Slide and
hold until the
camcorder turns
on or off
4. Inserting (or removing) memory card
A micro SD memory card (supplied) is recommended for recording.
As the memory card is small in size, it is recommended to use
a small coin
to help insert or remove it.
To insert card:
Push the card in until a click is heard
To remove card:
Push card in until a click is heard, then slowly release
the card. As card is under minimal tension when locked in memory
slot, please use care when removing.
Lift up the cover
NOTE:
The unit is properly charging when you
see the animated charging symbol on the
Camcorder display.
If you do not see this charging symbol, follow these
steps:
1.
Make sure that you have the camcorder
connected to the computer USB port through
USB cable, and the computer is turned on.
2.
Momentarily slide and hold the Camcorder power
switch to the ON position to initiate charging.
The camcorder has two operation modes (Preview and
Playback). It is always in Preview mode after switched on.
Refer to the diagram below for switching between modes.
Switch on
Auto timeout
Press
PHOTO
Press
PLAY/PAUSE
Playback mode
Press
PHOTO /
Press
Record
Preview mode
1
Take a photo
1
In Preview mode, press
Record
to record a video.
v2.0 (1.0.2.0) (EN)
English
USB port of
your
computer
USB cable