RCA H5400RE3 User Guide - Page 25
Handset Sound Signals, Troubleshooting Guide - problem
UPC - 044319400601
View all RCA H5400RE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Troubleshooting Tips UNKNOWN NAME: The incoming call is from an area where name was not sent. UNKNOWN NUMBER: The incoming call is from an area where number was not sent. Handset Sound Signals Signal Meaning A long warbling tone (with ringer on) Signals an incoming call Three short beeps Error tone Two short beeps (every 2 seconds) Page signal One short beep (every 6 seconds) Low battery warning Troubleshooting Guide Telephone Solutions No dial tone • Check and repeat installation steps: Ensure the base power cord is connected to a working outlet. Ensure the telephone line cord is connected to the base and the wall jack . • Connect another phone to the same jack; if there is still no dial tone, the problem might be your wiring or local service. • The cordless handset may be out of range of the base. Move closer to the base. • Ensure the battery is properly charged (12 hours). • Ensure the battery pack installed correctly. • Did the handset beep when you pressed the TALK button? The battery may need to be charged. Dial tone is OK, but can't dial out • Make sure the type of phone service you are subscribed to is TONE. This handset is TONE only. Handset does not ring • Make sure the handset ringer switch is turned on. • The cordless handset may be out of range. Move closer to the base. • Check for dial tone. If no dial tone is heard, see No dial tone above. You experience static, noise, or fading in and out • Change channels. 25