RCA H5400RE3 User Guide - Page 9
Installing the Handset Battery - manual
UPC - 044319400601
View all RCA H5400RE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connections and Setup • Avoid areas of excessive moisture or extremely low temperature. • Avoid dusty locations. • Avoid other cordless telephones or personal computers. INSTALLATION NOTE: Certain other communications devices may also use the 900 MHz frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner's manual for these devices on how to properly set channels to avoid interference. Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model 5-2650 that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. BATTERY BLACK WIRE PRESS DOWN FIRMLY RED WIRE 4. Insert the battery pack. 5. Close the battery compartment by pushing the door up until it snaps into place.